Ubud Monkey Forest Silver Class – Craft Your Own Silver Jewelry

Make something you can wear home. This small-group Ubud workshop lets you turn sterling silver into a personal ring, bracelet, or other piece under the care of a local Balinese silversmith. I like the hands-on process, since you take part in melting, hammering, shaping, soldering, filing, and polishing rather than simply watching. I also like the personal touches, including engraving and optional gemstones.

The main point to consider is that you can make only one piece, and silver use is counted as five grams even if your finished design weighs less. Design choices can also feel a little rushed, while more physical steps, such as hammering and pressing, may surprise you. Still, with patient help from instructors such as Eddie, Ketut, Ino, and Sugita, beginners have plenty of support.

Key details before you book

• You make one wearable piece: Choose a sample design or create your own ring, bracelet, or similar item, then take the finished silver jewelry with you.
• The class uses sterling silver 925: You work with pure silver at the start, then shape and finish the material through several traditional workshop steps.
• The process lasts 1.5 to 3 hours: Your timing depends on the design and the pace of the session.
• The class is capped at 10 people: This keeps the workshop small enough for personal guidance.
• Extra silver costs IDR 85,000 per gram: The included allowance is up to five grams, with a five-gram minimum charge even if your piece uses less.
• The workshop is about a 15-minute walk from the Monkey Forest: It ends at the same meeting point on Jalan Raya Monkey Forest.

Why this Ubud jewelry class is worth your afternoon

Ubud offers plenty of activities that are pleasant for an hour or two. This one gives you something more lasting: a piece of jewelry tied to a specific afternoon in Bali. You are not just buying a silver souvenir from a shop. You are helping shape it, marking it, smoothing it, and carrying the finished result home.

I especially like the way the class turns a craft into a shared activity. Couples can make matching rings, parents can work alongside older children, and solo participants can settle into the process with plenty of help. One couple used the class to make rings for each other, while another pair made matching pieces for a 25th anniversary. That gives the activity a little more meaning than a standard shopping stop.

The class is also useful for anyone who has always wanted to try silversmithing but assumes it requires years of training. You do not need previous jewelry-making experience. The instructors explain each stage and help you use the tools safely and effectively.

There is a physical side to it. Hammering and pressing silver takes effort, and one participant described the session as more of a workout than expected. That is not a bad thing, but you should not expect a completely relaxed craft lesson where the instructor does all the hard work.

Arriving near the Monkey Forest

The meeting point is the Ubud Monkey Forest Silver Class on Jalan Raya Monkey Forest, in Ubud. The workshop is near public transportation and about a 15-minute walk from the Monkey Forest itself, according to the practical feedback available for the activity.

That location makes it easy to pair the class with time in central Ubud. You can visit the Monkey Forest before or after, though you should allow enough time to reach the workshop without rushing. The activity does not include a shuttle, so you need to arrange your own way there.

At the end, you return to the same meeting point. That simple arrangement is helpful if you are building a day around central Ubud rather than staying at the studio for the rest of the afternoon.

The group size is limited to 10 participants. That is small enough to keep the session personal, though your exact level of one-on-one help will depend on how many people attend and how complicated their designs are.

Choosing a design before the tools come out

The first important decision is your design. You can select from sample rings, bracelets, and other patterns, or suggest a design of your own. The samples help if you want to avoid making creative decisions from scratch, while a personal design gives the finished piece more character.

Give yourself a clear idea of what you want before the class begins. The design selection period can feel brief, especially if you are choosing between several shapes and styles. If you already know your ring size, preferred shape, and whether you want a plain or patterned finish, you will spend less time hesitating.

The amount of hands-on work depends partly on your choice. A hammered or stamped design gives you more to do because you physically mark the surface. Some other designs may involve more shaping or instructor assistance. If your main goal is to take part in every stage, ask which designs offer the most hammering, stamping, and shaping before you decide.

You can also add engraving, including a personal word or place name. One particularly appealing idea is stamping Bali inside a ring. It is a small detail, but it turns a simple band into a much more personal reminder of your time in Ubud.

Gemstones are available for an additional charge. The price ranges from IDR 100,000 to IDR 500,000, depending on the stone and its size. This is optional, so a plain silver piece remains possible if you want to keep the cost down.

Melting sterling silver 925

Once you choose your design, the silversmith introduces you to the materials and tools. The first major step is melting sterling silver 925. The description refers to this as pure silver, though sterling silver 925 is an alloy made with 92.5 percent silver. The important point for you is that the workshop begins with silver material and transforms it into your own piece.

Watching metal change form gives the class its real sense of craft. You begin with a small amount of silver, then work toward a shape that can be worn. The instructor guides you through the process rather than leaving you to guess what to do.

This stage also gives you a feel for the workshop itself. It is practical, tactile work, not a polished demonstration designed only for photographs. You should expect tools, heat, metal, and repeated shaping. The process is approachable, but it still feels like real silversmithing.

Hammering, pressing, and shaping your piece

After the silver is prepared, you hammer and press it into a workable form. These steps help create the basic size and shape of the jewelry. For a ring, that may mean turning the silver into a band. For another design, you might be forming a different outline or texture.

This is where you get the most direct sense of the material. Silver does not simply bend into the correct shape with one easy movement. It takes repeated pressure and careful adjustment. You may need to work steadily, and you might feel the effort in your hands and arms.

The physical work is part of the appeal, but it also explains why some participants found the class more demanding than expected. If you prefer a quiet activity with little exertion, this may not be your ideal Ubud stop. If you enjoy learning by doing, the effort makes the finished jewelry feel earned.

The instructor remains important here. Small mistakes in size or alignment can affect the final piece, so listen closely and ask for help before forcing the silver. Instructors such as Ketut have helped participants refine their designs, while Eddie has received particular praise for his patient assistance with rings.

Soldering and assembling the jewelry

Once the silver has its basic form, you move on to soldering. This joins parts of the piece and helps turn the shaped material into a finished item. It is one of the technical steps that can seem intimidating to beginners, but you are guided through it.

You should not expect to master professional silversmithing in a single class. The value is in trying each part yourself with an experienced craftsperson nearby. You get a clear sense of how heat, pressure, and careful alignment work together.

The level of help can vary with your design. A simple ring may be easier to complete within the shorter sessions, while a more detailed piece may take closer to three hours. The stated class time ranges from 1.5 to 3 hours, so keep your schedule flexible rather than booking a tight connection afterward.

This is also a good point to remember the one-piece limit. Each participant can make only one silver jewelry item. You cannot combine your silver allowance with another person, so couples cannot pool material to create one larger piece together.

Filing, smoothing, and polishing

The final stages are filing and polishing. Filing removes rough edges and helps refine the shape. Polishing gives the jewelry its finished surface and makes it ready to wear.

These steps can take patience. A ring may look nearly finished before filing, but small rough areas matter when the piece touches your skin. The polishing stage is satisfying because it brings out the silver’s shine and makes the result look less like a workshop project and more like a proper piece of jewelry.

You take your finished item home. The included silver allowance is based on one to five grams, with the final weight depending on your design. If the jewelry weighs more than five grams, the extra charge is IDR 85,000 per gram.

Pay attention to the minimum billing rule: if your design uses less than five grams, the silver is still counted as five grams. That makes very small pieces less economical than you might first assume. Ask about the expected weight before settling on a design if keeping the price low matters to you.

What the $41.85 price really includes

At $41.85 per person, the price is reasonable for a three-hour craft activity that includes materials, tools, instruction, a snack, mineral water, Wi-Fi, and one piece of handmade silver jewelry to take home.

The value is strongest if you want the experience as much as the souvenir. You are paying for access to a working craft process and guidance through several stages that would be difficult to attempt alone. The finished ring or bracelet becomes a physical record of what you learned.

The base price is not the final price for every design. Extra silver above five grams costs more, and gemstones add IDR 100,000 to IDR 500,000. Engraving is available according to the design options and may also affect the final cost, so confirm any extras before the work begins.

A snack and mineral water are modest inclusions, but they are useful during a session that may involve steady physical effort. Wi-Fi is also provided, though it is not the reason to book the class.

The instructors make the difference

The strongest part of the experience is the personal guidance. The class depends on the silversmiths being patient, clear, and willing to correct your technique without taking over the entire project.

Eddie has helped participants make rings while offering close design support. Ketut has assisted with ring shaping and helped improve designs so they looked balanced. Ino has been praised for a friendly teaching style, and Sugita has added humor and energy to the experience.

That range of named instructors matters because it suggests the class is not just a fixed demonstration. The personality of your silversmith may shape the mood of the afternoon. You can expect an approachable teaching environment, but the exact instructor is not specified in the booking information.

The best approach is to stay open to advice. Your first idea may need a small change to work well in silver. A skilled instructor can help simplify a design, correct proportions, or suggest a better finish while still letting you keep ownership of the piece.

Families, couples, and solo participants

This class suits couples especially well. You can make matching rings, create a piece for each other, or simply work side by side. It also works for anniversaries and other personal milestones because the final jewelry carries the memory of making it together.

Older children can take part, and the activity has been described as a good family experience for them. The workshop is wheelchair and stroller accessible, which makes it easier for families with different mobility needs. The information does not give a specific minimum age, so check before booking if you are bringing a young child.

Solo participants should not feel out of place. The format gives you a clear task and regular contact with the instructor, so you do not need a partner to enjoy it. A solo participant can focus on a personal design and leave with a ring that feels entirely their own.

This is less suited to someone who wants to make several items in one visit. The official limit is one piece per participant, even though the session may last up to three hours.

Practical planning for your Ubud day

Book this as a main activity, not as a quick filler between fixed appointments. The class may take 1.5 hours, but it can run to three hours depending on the design and your pace.

Arrive with an idea of what you want, but do not make the design so complicated that you spend the entire session trying to finish it. A simple ring with hammering, stamping, or engraving can provide plenty of hands-on work without creating unnecessary pressure.

Wear something comfortable for a craft session. The provided information does not specify a dress code, but you should expect to handle tools and work through repeated hammering, shaping, and polishing.

The workshop includes snacks and mineral water, but it does not include transportation. It ends where it begins, so plan your own route to Jalan Raya Monkey Forest. Free cancellation is available if you cancel at least 24 hours before the start time. Cancellations within 24 hours are not refunded, and late changes are not accepted.

Who should book this silver workshop

Book it if you want an authentic, hands-on souvenir and enjoy learning a craft through direct practice. It is particularly good for couples, older children with adults, solo visitors, and anyone marking a birthday, anniversary, or special trip.

Think twice if you want a completely effortless activity, need to make several pieces, or dislike deciding on a design under time pressure. The extra-silver and gemstone charges also mean you should set a budget before you arrive.

For most people, the combination of friendly instruction, real metalworking, and a wearable result makes this a strong use of an afternoon in Ubud. Choose a manageable design, ask about the weight and extras, and let the silversmith guide your technique. If you do that, you should leave with both a useful keepsake and a better sense of how silver jewelry is made.

FAQ

Where does the silver-making class take place?

The class takes place at Ubud Monkey Forest Silver Class on Jalan Raya Monkey Forest, Ubud, Kecamatan Ubud, Kabupaten Gianyar, Bali 80571, Indonesia.

How long does the activity last?

The class lasts between 1.5 and 3 hours. The exact duration depends on the design and the pace of the participant.

How many people can join the class?

The maximum group size is 10 participants.

Do I need previous jewelry-making experience?

No. The class is designed for beginners, and no jewelry-making experience is necessary.

What type of jewelry can I make?

You can choose from sample designs or create your own design. Available examples include rings and bracelets, though the exact design options may vary.

How much silver is included?

You can make one piece using between 1 and 5 grams of silver. However, silver use is accounted for as five grams even if your finished jewelry weighs less.

Can I use more than five grams of silver?

Yes. Silver above five grams costs an additional IDR 85,000 per gram.

Can I add a gemstone?

Yes. Gemstones are available for an extra charge of IDR 100,000 to IDR 500,000, depending on the type and size.

Is transportation included?

No. Shuttle transportation is not included. You need to make your own way to the workshop.

Can I cancel for a full refund?

Yes, if you cancel at least 24 hours before the experience start time. Cancellations made within 24 hours are not refunded, and changes made within that period are not accepted.